Cannon TRADITIONAL 60 Service Manual download pdf (Page 37)

WARNING - THIS APPLIANCE MUST BE EARTHED.

The cooker must be connected by a qualified electrician to a suitable double - pole control unit with a minimum

rating of 32A and a minimum contact clearance of 3mm, which should be fitted adjacent to (but not abo

ve) the

cooker, in accordance with IEE regulations.

The power supply cable should conform to BS6004 with a conductor size of 4mm

The control unit should be easily accessible in the event of an emergency.

This appliance conforms to EN55014 regarding suppression of radio and television interference.

The cooker terminals are behind the cover at the rear The mains cable

must pass through the cable clamp and

the screws must be fully tightened. Sufficient cable should be used to allow the cooker to be pulled out for

servicing. Ensure that the cover is fully closed and secure after

wards.

Take care not to trap the mains cable when pushing the cooker into its final position.

ELECTRICAL CONNECTION

1 2 ... 32 33 34 35 36 37 38 39 40

No comments

Cannon TRADITIONAL 60 Service Manual Page 37