DIGI-TROLL 5DIGI-TROLL 5 TSOwner’s Manual
10www.cannondownriggers.comBOOM END PULLEYTelescopic Boom1) Remove boom end assembly from hardware bag.2) Remove #8 self tapping screw from hardware b
11www.cannondownriggers.comREMOVABLE SPOOL COVERYour new downrigger comes with a removable spool cover. By removing this cover, you are able to gain
12www.cannondownriggers.comInstallationATTACHING THE ROD HOLDER(S)The locking rod holder(s) incorporate a locking tooth design which can be easily adj
13www.cannondownriggers.comInstallationTERMINATING THE DOWNRIGGER CABLETIP: Use only straight cable when routing through the terminator. Worn or kink
14www.cannondownriggers.comUSING YOUR DIGI-TROLL WITH THE INTELLITROLL ACCESSORYBoth the Digi-Troll 5 and Digi-Troll 10 are compatible with the Intell
15www.cannondownriggers.comUSING THE INCLUDED POWER LOSS MANUAL CRANK HANDLEIn case of a dead battery, your downrigger comes equipped with a power los
16www.cannondownriggers.comInstallationWiring Your DownriggerYour Boat’s Electrical Condition It is important to make sure that your boat is properly
Le greement et les Directives D’installation :Le greement et les Directives D’installation :Pour la securite et les raisons d’acquiescement, nous reco
18www.cannondownriggers.comGETTING STARTEDOperating the Digi-Troll 5The Digi-troll 5 offers you the most advanced features available in a downrigger.
19www.cannondownriggers.comGetting StartedDigi-Troll 5 Keypad The Digi-Troll 5’s keypad has six keys located below the display.PowerThe ON/OFF key fu
2www.cannondownriggers.comTable of ContentsTABLE OF CONTENTSIntroduction ...
20www.cannondownriggers.comProgramming the Digi-Troll 5The Digi-Troll 5 contains four menus that enable you to program and customize its operation. An
21www.cannondownriggers.comGetting StartedPositive Ion Control MenuThis menu lets you control the PIC level from 0.2 vdc to 1.2 vdc. Press the Menu on
22www.cannondownriggers.comUn/Coated MenuThis menu lets you switch between Cannon coated and uncoated cable. This setting is important as well in de
23www.cannondownriggers.comGetting StartedNetworking your Digi-TrollsUp to six Digi-Troll series downriggers can be networked together with the Cannon
24www.cannondownriggers.comFishing With Your Downrigger After programming your Digi-Troll, release some line from your rod and reel so that the l
25www.cannondownriggers.comHow the Positive Ion Control System Works The PIC system uses an internal circuit that passes the voltage through the
26www.cannondownriggers.comBlowback Simply stated, blowback is what hap-pens to the downrigger weight when you pull it through the water behind your
27www.cannondownriggers.comTen Good Trolling Tips1) Test your lures over the boat side be-fore sending them down and back. Do this to make sure the l
28www.cannondownriggers.comTroubleshootingPROBLEM: In the UP or AUTO-UP mode the downrigger stops periodically but the display stays on or the circuit
29www.cannondownriggers.comTHIS PAGE INTENTIONALLY LEFT BLANK
3www.cannondownriggers.comIntroductionIntroductionOverviewThank you for purchasing the Cannon Digi-Troll 5 electric downrigger. We have designed your
30www.cannondownriggers.comParts List1902315 Digi-Troll 5376637
3775397 400’ CABLE37779272373450 SCREW #8-18 x 5/8” THD (SS)339173731www.cannondownriggers.comParts List1902315 Digi-Troll 5In the U.S.A., repl
32www.cannondownriggers.comParts List1902320 Digi-Troll 5 TS
3775397 400’ CABLE37779272373450 SCREW #8-18 x 5/8” THD (SS)339173733www.cannondownriggers.comParts List1902320 Digi-Troll 5 TSIn the U.S.A., r
34www.cannondownriggers.comWiring DiagramDigi-Troll 5 Series Wiring Diagram
35www.cannondownriggers.comNOTES:_____________________________________________________________________________________________________________________
www.cannondownriggers.comENVIRONMENTAL COMPLIANCE STATEMENT:It is the intention of Johnson Outdoors Marine Electronics, Inc. to be a responsible corpo
4www.cannondownriggers.comProduct WarrantyCANNON LIMITED WARRANTY...
5www.cannondownriggers.comProduct OverviewIntroduction to Controlled Depth Fishing...
6www.cannondownriggers.comInstallationDownrigger Mounting on Boats A downrigger should be mounted wherever it is easy to operate and observe. You
7www.cannondownriggers.comInstallationDecks thinner than 1/4” Use a Cannon deck plate (PN 2200693) to prevent defl ection and add stability to de
8www.cannondownriggers.comINSTALLING THE BOOM AND BALL HOOK1) Remove the ball hook collar, ball hook, and 1/4-20 nut from the included hardware bag as
9www.cannondownriggers.comFIGURE 5FIGURE 6FIGURE 7FIGURE 86) Insert the 1/4-20 nylon locknut into the hex pocket on the nose of the frame (motor side
Comments to this Manuals