CannonThis heater is approved for use with Natural and Propane gases.Please leave instructions with the ownerUSER INSTRUCTIONSINSTALLATION INSTRUCTION
10Overall dimensions: Refer fig. 8.1. This appliance is to be installed by a licensed service person only.2. This appliance shall be installed in acco
11 Gas connection10. Connect incoming gas supply pipe to 1/2” compression fitting at rearof appliance. For inlet position see figure 13.Lo
12Position the four individually numbered logs in the following order onthe burner head as shown in figures 15 - 18. The male locating pins inthe burn
12Position the four individually numbered logs in the following order onthe burner head as shown in figures 15 - 18. The male locating pins inthe burn
11 Gas connection10. Connect incoming gas supply pipe to 1/2” compression fitting at rearof appliance. For inlet position see figure 13.Lo
10Overall dimensions: Refer fig. 8.1. This appliance is to be installed by a licensed service person only.2. This appliance shall be installed in acco
9Gas type: Natural or Propane gas, as indicatedon data label.Gas consumption: 26 MJ/hr input.Energy output: 21.45 MJ/hr (5.96 kW).Energy star rating:
8Flame characteristicsThe heater flame should be stable, no lifting from the burner and the logsshould glow after approximately 15 minutes operation o
75. To increase the fan speed to MED, press switch for MED setting. Referfigure 5.6. To increase the fan speed to HIGH, press switch for HIGH setting.
6Operating instructions1. Plug the power cord into the wall socket and turn on the power to theheater, see figure 1. Use of an extension cord is not r
2ContentsContents 2Warranty 3❍ DistributorSafety warnings 4-5❍ What to do if you smell gas❍ Warnings❍ StandardsUser instructions 6-8❍ Operating instru
57. Do not spray aerosols in the vicinity of this appliance while it is inoperation.Do not place articles on or against this appliance.Do not use or s
4Please read this manual before installing and using the heater.What to do if you smell gas1. Turn OFF the main gas supply.2. Extinguish any open fl
3The Cannon appliance is warranted against defects in materials and work-manship for a period of one, (1) year from its date of original purchase, for
2ContentsContents 2Warranty 3❍ DistributorSafety warnings 4-5❍ What to do if you smell gas❍ Warnings❍ StandardsUser instructions 6-8❍ Operating instru
CannonThis heater is approved for use with Natural and Propane gases.Please leave instructions with the ownerUSER INSTRUCTIONSINSTALLATION INSTRUCTION
3The Cannon appliance is warranted against defects in materials and work-manship for a period of one, (1) year from its date of original purchase, for
4Please read this manual before installing and using the heater.What to do if you smell gas1. Turn OFF the main gas supply.2. Extinguish any open fl
57. Do not spray aerosols in the vicinity of this appliance while it is inoperation.Do not place articles on or against this appliance.Do not use or s
6Operating instructions1. Plug the power cord into the wall socket and turn on the power to theheater, see figure 1. Use of an extension cord is not r
75. To increase the fan speed to MED, press switch for MED setting. Referfigure 5.6. To increase the fan speed to HIGH, press switch for HIGH setting.
8Flame characteristicsThe heater flame should be stable, no lifting from the burner and the logsshould glow after approximately 15 minutes operation o
9Gas type: Natural or Propane gas, as indicatedon data label.Gas consumption: 26 MJ/hr input.Energy output: 21.45 MJ/hr (5.96 kW).Energy star rating:
Comments to this Manuals